HP Power On/Off Switch and LED, CPU fan?
I trying to move a Z400 motherboard to a deference chassis I'm having problem as i don't know what order to connect pins eg power, reset, LED.
Can you give me an image how it should be connected?
Also I'm trying to use a normal CPU fan that have 4 pins but CPU i have a converter from 4 to 5 is it going to work?
Can you send me a link were can i get converter from normal PSU to the Z400 motherboard?
ModDIY.com stocks pre-built ATX to HP-non standard power jumpers, in a sleeved and unsleeved version. Working for me right now like a charm.
Also, I don't have the link in front of me but I'll try to dig it up (it may be addressed on this site as well - I arrived here knowing this was an issue) - there's some sort of temp sensor jumper that apparently is sleeved in with the wires running to the z400 stock case's power switch, and that sensor jumper has to be un-sleeved from the power switch wires and preserved and re-plugged after you move the motherboard to the new chassis - allegedly the board won't post without it connected. I'll look for the link when I have a minute - it came from a builder that did a youtube video of building a gaming chassis based machine out of Z400 guts. he discovered he needed to dig out the sensor jumper and re-use it.