what type is the motherboard

i have a t3610 and i need to know what type of motherboard it has becuase i want to swap the case with a gaming case is the motherboard an atx or maybe a microatx

26replies Oldest first
  • Oldest first
  • Newest first
  • Active threads
  • Popular
  • What part #?

    Like
  • the mothrboard is it an atx or micro atx

    Like
  • Best of my knowledge it can't be swapped. Its not an atx or eatx. The io shield comes further out requiring the specific Dell case.  If I were to try a swap I'd find a large cases that was rated to take an eatx motherboard but also have the standoffs to use atx matx itx ect. You will have to cut the back of the case and make something for the io shield regardless. Can I ask why you would like to swap? I can think of a few reasons I don't like my precision case but I may be able to help you with the issues your having with yours

    Like
      • khaled k
      • khaled_k
      • 5 mths ago
      • Reported - view

      Rob Frank  well i dont like the case its kinda wierd and i cant pt it on my desk becuse its so heavy it would crack the dest 2 pieces and i wanted t get a cooler one that would fit for gaming

      Like
  • It's not that heavy lol. Maybe a better desk needed. There is supposed to be rubber feet on the bottom and on the side so you can stand it up or lay it down. If you would like to buy a bunch of rgb stuff for inside of it have at it. If your good with tools you can cut a decent part of the door away and put in a piece of acrylic so the internals are visible.  And going that far strip the case out and paint it. Could probably make it look pretty cool.

    Like
      • khaled k
      • khaled_k
      • 5 mths ago
      • Reported - view

      Rob Frank i just wish i could get that glass door thing for it but i cant becuse i could not find one 

      Like
      • khaled k
      • khaled_k
      • 5 mths ago
      • Reported - view

      khaled k and i need to know what the fan size is like is it 120 mm

      Like
  • cant buy a glass door. you have to make one. start with a saw and go to town on the door. i know there are videos on doing such things. the fans in the system aren't very visible. I don't know if you took the front fan module out and replaced the fans with rgb ones it may shine through the front. that would be cool. other than that there is really one area in the back of the case to mount a fan. I can measure that area later on my 5810 to see how big of a fan you could mount there. 

    Like 1
  • remove this and get something else for there. extruded aluminum or stainless screen. or spend a bunch of time and open up all the diamonds with a dremel tool. they are angled so you can't see through looking at it straight on. And here is a link to someone that has done the glass door mods and lighting https://www.reddit.com/r/pcmods/comments/k9cqa9/dell_workstation_mod_attempt_full_clear_side/

    Like
  • ok i will try to do that but thanks

    Like
  • The only other thing I'd really do If I were to make a glass door. Gut all the components out of the case and spray bomb it black. the half shiny metal inside looks like crap. 

    Like
      • khaled k
      • khaled_k
      • 5 mths ago
      • Reported - view

      Rob Frank is there any posible way of changing the color of the mother board

      Like
      • khaled k
      • khaled_k
      • 5 mths ago
      • Reported - view

      khaled k and how do i take out the peice with the diamonds

      Like
  • dont really have an answer to either one of those. I have my pc sitting here but I have no reason to take my fan module out and it does sorta look like a pain.....sorry. ask for the motherboard I know they make conformal coating. I've seen different colors of it. Basically its a water proof coating for circuit boards. I do not have personal experience with it. 

    Like
      • khaled k
      • khaled_k
      • 5 mths ago
      • Reported - view

      Rob Frank ok

      Like
  • so are they 120 mm

    Like
  • Looks like they are 90mm. 

    Like
  • where is it posible to find the acrilic glass

    Like
      • khaled k
      • khaled_k
      • 5 mths ago
      • Reported - view

      khaled k and if i were to put 120 mm fans instead of 90 mm will it work

      Like
  • No you cannot put larger fans where there is not space for them. I'd suggest pulling your fans and measuring them anyways. I did not pull mine and looking then up by the part number I found one reference to 90mm. I cannot be certain this is what they are to tell you that they are not something slightly different. You can get your choice of clear plastic from Amazon. Look for scratch resistant. You can get them clear, frosted, smoked ect.

    Like
      • khaled k
      • khaled_k
      • 5 mths ago
      • Reported - view

      Rob Frank ok

      thanks

      Like
  • and what about the end of the case door there is a down then up

    Like
  • I don't understand that question. could you explain a little more?

    Like
  • so at the end of the case door if you look it goes down

    Like
  • are you talking near the rear grab handle? You don't have to make the entire thing out of glass. you can cut a decent section of the door away. And I'm sorry but at some point your just going to have to get creative. I don't really game nor do I care about what my computer looks like. I just didn't want to see you not like a perfectly good machine that will treat you well gaming wise. 

    Like
Like Follow
  • 5 mths agoLast active
  • 26Replies
  • 31Views
  • 3 Following