Z600 V2 WORKSTATION
My old xw6600 just die on me so I got myself a Z600 with only 4gb of 667mhz ram. I transferred all my devices from the xw6600 to the Z600. PCIE usb 3.0, Intel AX3000 WiFi Bluetooth pcie, Radeon HD 7750 n Quadro Q2000. The 2gb x 2 ram is killing me. So slow moving. I just ordered a Samsung 16GB 2Rx4 PC3L 1513 – 12800R – 11-12-E2-D3
M393B2G70QH-YKO. Not sure 1 stick will work on the Z600. I know 6 x 16gb no problem. Can anyone tell me confirm will work tks.
-
To get any benefit your platform, you will have to upgrade in sets. A single stick will not work.
-
stormson weathers Hi Good day so 1 stick will work right. 5 more on the way! Should I go 32gb x 6? Will it work? Tks
-
stormson weathers
-
Nagasawa Salahuddin
-
-
My apology. Let me rephrase. Will the Z600 workstation boot up n work as normal? Benefit of more sticks will come later. Tks
-
Nagasawa Salahuddin Did you verify which motherboard you have installed? Also, 32GB modules are not compatible with the Z600 Workstation.
This is the board that will support 6 x 16GB Modules:
Version 2 System Board PN: 591184-001 (460864-003)
-
Jbigticket23 yes I am using 6 x 16gb
-
-
Just boot up with only 1 stick of 16gb. Work like a charm! Waiting game now. 5 more on the way. Can see pc now so much faster n cooler!
-
Nagasawa Salahuddin Hi Good Day I not sure if it is a problem. I ordered a Samsung 16GB pc3l model no M393B2G70QH0 but I received model M471B1573DB0. But the ram is working fine on the Z600. I ordered 5 more model M393B2G79QGI earlier. I informed shipper to change the model to M471 but shipper refused so I have to cancelled the order. Now my question is M393 and M471m, are they the same or different model cannot be used on the Z600. I don't want to end with 5 unusable rms. Thanks
-
Nagasawa Salahuddin Hi Good day to all. I am using NZXT am on my Z600 but I am getting a n/a on my fan. Tks
-
Nagasawa Salahuddin on your fans , take them out and clean them and spray the components down with a compressed air can ,get into the sockets real good with the red needle! Costco or Bjs is a good place to get the air cans if you're in America! Spray down your Mobo and get a good dusting going, I make it my biz to do this at least once a year!
Disassemble the Z an clean every Nook and cranny!!!
Reinstall everything and check the fans then, also check to see if the fans is on in the Bios!!! If no luck you need a new fan or the Mobo could be on its way out these are 10+ year old rigs but work like Abrams tanks,lol
On the ram,yes ram component parts numbers can be very very confusing 😕
So reference back to the z600 articles here and follow the specs on ram, also Google ram for z600 or go to ebay and type in the filter the same specs here on the z articles which is ,16gb, 240pin,dimm, the L letter on any ram means Low Voltage! Which can compensate if you have a lot of pcie cards that require alot of power! But I wouldn't even turn on the Z if you have the 2 cpu installed ,which could be an issue with the fan not turning on ,who know what type of safety features HP embedded into the Z!!!!
Hope this helps
-
djsegwon kithebeats
-
-
Tks for your answers to my questions. All fans r on but n/a only on the cpu fan but no overheating. Temperature always under 50°c. I will check of fan in bios. Thanks again. Much apprTks for your answers to my questions. No dust in PC. All fans r on but n/a only on the cpu fan but no overheating. Temperature always under 50°c. I will check of fan in bios. Thanks again. Much appreciated.
-
Hi Good Day, I am receiving 5 red beeps after I tried to enter CMOS/BIOS by pressing Control and F11 buttons. I off the machine and let it rest for 5 mins before switching it on again. Normal operation now. All normal. I was trying to check if the cpu fan is enable as the APP NZXT cam is showing n/a. Cannot be Ram or motherboard problem right? Thanks
-
Nagasawa Salahuddin can you post clear picture of the labels on the memory modules?
-
Jbigticket23 Hi Good day. I ordered Model M393B2G70QH0 but seller send me Model471B5173DB0 and he has only 1 stick! Thanks
-
Nagasawa Salahuddin Can you also help me as I dare not try to use ctrl and F11 button to access BIOS. Now system is working properly but I still cannot get NZXT to access fan speed. Thanks.
-
Nagasawa Salahuddin Hi Good Day. I am using 4 wire cables for my Z600 CPU cooler. I unplug and replug the socket but still unable to fix the cpu fan n/a. Thanks.
-
Nagasawa Salahuddin the 12800. Ram just down grades to 10600, jb Spoke on that an it's in the z600 articles here, so if you're using say 1 /12800 & 1 /10600 ram stick that's an issue also if you have the 2 cpu but only using 1 ram stick in the whole system, that's an issue. Take one of the cpu out!!! Also check to see if your bios is 3.61 an up!!! Update the hell out of windows ,whatever version, but especially win10!!! You need to dive into the z600 articles !
Also it seems you may have registry issues if you can't access the bios or a bad install of windows!
Use a registry cleaner like, CCleaner, Glarysoft or Avg/pctuneup!!!!
-
Nagasawa Salahuddin the z, is not built for a aftermarket cooler, just put the regular heatsinks back on!!!!!! You may have to repaste with more thermal paste as well, especially if you never did it since getting your z,!
-
Nagasawa Salahuddin 12800S modules won't work. You need 10600R, 12800R, or 14900R Modules.
-
Jbigticket23 Thanks.
-
djsegwon kithebeats thanks
-
djsegwon kithebeats thanks will do
-
djsegwon kithebeats Thanks will do.
-
djsegwon kithebeats thanks for your reply.
-
Jbigticket23 but doesn't it still down game to 10600, even though you have 12800/14900????
-
djsegwon kithebeats down grade***
-
djsegwon kithebeats djsegwon kithebeats no sure if its downgrade.
-
djsegwon kithebeats The speeds will clock down to the max frequency supported by your processor. Most likely 1066Mhz or 1333Mhz.
-
djsegwon kithebeats Hi Good Day. I have tested using a drop like a pea and 3/4 of the chip surface with Silver 4 for an hour each. Very little difference around 1 to 2 degree difference. I am using only a drop like a pea on the chip. Thanks.
-
-
Hi Good day my ram is running at 1600Mhz. I took out all parts, air clean and assemble back all parts. I have reinstall windows 10 enterprise x64 to 20H2 and use tronscript to debloat. No Problem pressing F10 to enter setting but will corupt If I press ctrl and F10 button. Reinstall total 3 times bcos I press ctrl and F10. What is the correct buttons to press? Fan speed still n/a. And how do I update bios version to 3.61 or higher? Cannot find in the HP Z600 official website. Thanks
-
Nagasawa Salahuddin Hi Good day to all. I am wondering if my present Samsung 16gb 12800S will work together with 10600R or 12800R ram modules?
-
-
Hi Good Day to all. I have updated my BIOS to 3.61 using HPQ flash. Thanks all for your help.
-
Bios higher than v3.61? Thanks
-
Hi Good day. How to I change the Z600 cpu fan cables from 4 pins to 5 pins. Thsnks
-
Nagasawa Salahuddin You can purchase adapters online. However, they don't always work as advertised.
-
Jbigticket23 Thanks for your reply. I want to buy new cables due to n/a on my cpu fan. Fan can see working but after trying cleaning using needle to clean still not detected by speed fan. Thanks again.
-
