Back to www.greenpcgamers.com

How to enable Javascript

Latest Posts

Re: Z600 V2 WORKSTATION @Jbigticket23 Thanks for your reply. I want to buy new cables due to n/a on my cpu fan. Fan can see working but after trying cleaning using needle to clean still not detected by speed fan.…
- Nagasawa Salahuddin
- Retired
- Nagasawa_Salahuddin
- 1 mth ago
- HP Workstations
- Reported - view
Re: Z600 V2 WORKSTATION Hi Good day. How to I change the Z600 cpu fan cables from 4 pins to 5 pins. Thsnks
- Nagasawa Salahuddin
- Retired
- Nagasawa_Salahuddin
- 1 mth ago
- HP Workstations
- Reported - view
Re: Z600 V2 WORKSTATION @djsegwon kithebeats Hi Good Day. I have tested using a drop like a pea and 3/4 of the chip surface with Silver 4 for an hour each. Very little difference around 1 to 2 degree difference.…
- Nagasawa Salahuddin
- Retired
- Nagasawa_Salahuddin
- 2 mths ago
- HP Workstations
- Reported - view
Re: Z600 V2 WORKSTATION Bios higher than v3.61? Thanks
- Nagasawa Salahuddin
- Retired
- Nagasawa_Salahuddin
- 2 mths ago
- HP Workstations
- Reported - view
Re: Z600 V2 WORKSTATION Hi Good Day to all. I have updated my BIOS to 3.61 using HPQ flash. Thanks all for your help.
- Nagasawa Salahuddin
- Retired
- Nagasawa_Salahuddin
- 2 mths ago
- HP Workstations
- Reported - view
Re: Z600 V2 WORKSTATION @Nagasawa Salahuddin Hi Good day to all. I am wondering if my present Samsung 16gb 12800S will work together with 10600R or 12800R ram modules?
- Nagasawa Salahuddin
- Retired
- Nagasawa_Salahuddin
- 2 mths ago
- HP Workstations
- Reported - view
Re: Z600 V2 WORKSTATION Hi Good day my ram is running at 1600Mhz. I took out all parts, air clean and assemble back all parts. I have reinstall windows 10 enterprise x64 to 20H2 and use tronscript to debloat.…
- Nagasawa Salahuddin
- Retired
- Nagasawa_Salahuddin
- 2 mths ago
- HP Workstations
- Reported - view
Re: Z600 V2 WORKSTATION @djsegwon kithebeats @djsegwon kithebeats no sure if its downgrade.
- Nagasawa Salahuddin
- Retired
- Nagasawa_Salahuddin
- 2 mths ago
- HP Workstations
- Reported - view
Re: Z600 V2 WORKSTATION @djsegwon kithebeats thanks for your reply.
- Nagasawa Salahuddin
- Retired
- Nagasawa_Salahuddin
- 2 mths ago
- 1
- HP Workstations
- Reported - view
Re: Z600 V2 WORKSTATION @djsegwon kithebeats Thanks will do.
- Nagasawa Salahuddin
- Retired
- Nagasawa_Salahuddin
- 2 mths ago
- 1
- HP Workstations
- Reported - view
Re: Z600 V2 WORKSTATION @djsegwon kithebeats thanks will do
- Nagasawa Salahuddin
- Retired
- Nagasawa_Salahuddin
- 2 mths ago
- 1
- HP Workstations
- Reported - view
Re: Z600 V2 WORKSTATION @djsegwon kithebeats thanks
- Nagasawa Salahuddin
- Retired
- Nagasawa_Salahuddin
- 2 mths ago
- 1
- HP Workstations
- Reported - view
Re: Z600 V2 WORKSTATION @Jbigticket23 Thanks.
- Nagasawa Salahuddin
- Retired
- Nagasawa_Salahuddin
- 2 mths ago
- 1
- HP Workstations
- Reported - view
Re: Z600 V2 WORKSTATION @Nagasawa Salahuddin Hi Good Day. I am using 4 wire cables for my Z600 CPU cooler. I unplug and replug the socket but still unable to fix the cpu fan n/a. Thanks.
- Nagasawa Salahuddin
- Retired
- Nagasawa_Salahuddin
- 2 mths ago
- HP Workstations
- Reported - view
Re: Z600 V2 WORKSTATION @Nagasawa Salahuddin Can you also help me as I dare not try to use ctrl and F11 button to access BIOS. Now system is working properly but I still cannot get NZXT to access fan speed. Thanks.
- Nagasawa Salahuddin
- Retired
- Nagasawa_Salahuddin
- 2 mths ago
- HP Workstations
- Reported - view
Re: Z600 V2 WORKSTATION @Jbigticket23 Hi Good day. I ordered Model M393B2G70QH0 but seller send me Model471B5173DB0 and he has only 1 stick! Thanks
Attachment
- Nagasawa Salahuddin
- Retired
- Nagasawa_Salahuddin
- 2 mths ago
- HP Workstations
- Reported - view
Re: Z600 V2 WORKSTATION Hi Good Day, I am receiving 5 red beeps after I tried to enter CMOS/BIOS by pressing Control and F11 buttons. I off the machine and let it rest for 5 mins before switching it on again.…
- Nagasawa Salahuddin
- Retired
- Nagasawa_Salahuddin
- 2 mths ago
- HP Workstations
- Reported - view
Re: Z600 V2 WORKSTATION Tks for your answers to my questions. All fans r on but n/a only on the cpu fan but no overheating. Temperature always under 50°c. I will check of fan in bios. Thanks again.…
- Nagasawa Salahuddin
- Retired
- Nagasawa_Salahuddin
- 2 mths ago
- HP Workstations
- Reported - view
Re: Z600 V2 WORKSTATION @djsegwon kithebeats
- Nagasawa Salahuddin
- Retired
- Nagasawa_Salahuddin
- 2 mths ago
- HP Workstations
- Reported - view
Re: Z600 V2 WORKSTATION @Nagasawa Salahuddin Hi Good day to all. I am using NZXT am on my Z600 but I am getting a n/a on my fan. Tks
- Nagasawa Salahuddin
- Retired
- Nagasawa_Salahuddin
- 2 mths ago
- HP Workstations
- Reported - view
Re: Z600 V2 WORKSTATION @Nagasawa Salahuddin Hi Good Day I not sure if it is a problem. I ordered a Samsung 16GB pc3l model no M393B2G70QH0 but I received model M471B1573DB0. But the ram is working fine on the Z600.…
- Nagasawa Salahuddin
- Retired
- Nagasawa_Salahuddin
- 2 mths ago
- HP Workstations
- Reported - view
Re: Z600 V2 WORKSTATION Just boot up with only 1 stick of 16gb. Work like a charm! Waiting game now. 5 more on the way. Can see pc now so much faster n cooler!
- Nagasawa Salahuddin
- Retired
- Nagasawa_Salahuddin
- 3 mths ago
- HP Workstations
- Reported - view
Re: Z600 V2 WORKSTATION @Jbigticket23 yes I am using 6 x 16gb
- Nagasawa Salahuddin
- Retired
- Nagasawa_Salahuddin
- 3 mths ago
- HP Workstations
- Reported - view
Re: Z600 V2 WORKSTATION My apology. Let me rephrase. Will the Z600 workstation boot up n work as normal? Benefit of more sticks will come later. Tks
- Nagasawa Salahuddin
- Retired
- Nagasawa_Salahuddin
- 3 mths ago
- HP Workstations
- Reported - view
Re: Z600 V2 WORKSTATION @Nagasawa Salahuddin
- Nagasawa Salahuddin
- Retired
- Nagasawa_Salahuddin
- 3 mths ago
- HP Workstations
- Reported - view

1 2 Next

Back to top

Nagasawa Salahuddin

Nagasawa_Salahuddin

Retired

Malaysia

28
5
0

Follow

HiFi n Home theater r my favourite. I use to love travelling but now retired.